Dosing & filling / QDM

SoDose dispensing device

The compact horizontal DoseCore device for liquid transfer and controlled dispensing.

Enquire about this machine

DoseCore family · Configuration agreed per project

SoDose horizontal enclosed dispensing device with carry handle and QDM maker plate · generated design visualization — Generated QDM design visualization · Representative design visualization

The application

What the equipment is for.

SoDose is the compact horizontal enclosed dispensing architecture in the DoseCore family. Liquid transfer and controlled dispensing are the main project routes. Pump selection, fluid compatibility, connections and controls are developed around the actual media and operating requirement. An application-specific outlet or spray arrangement can be reviewed separately where required.

Applications to discuss

Hose-fed liquid transfer
Controlled liquid dispensing
Compact R&D delivery equipment

Developed around the requirement

Configure the working process.

Fluid and delivery

Match the delivery arrangement to the liquid, outlet and intended spray or dispensing task.

Compact mechanical layout

Develop the enclosure, carrying arrangement, component access and hose connections.

Operating requirements

Agree the controls, power arrangement and checks needed for the actual use environment.

Materials, dimensions, operating range, output, controls and delivery scope are confirmed in the project proposal.

Application & engineering guide

Compact liquid transfer and controlled dispensing

Use these notes to define the application before choosing the final equipment configuration.

Working principle

SoDose is the horizontal enclosed dispensing architecture within DoseCore. Its main project route is moving a liquid through a defined hose and outlet, with controls matched to the intended delivery task. This differs from a filling workstation where the container position and a measured endpoint form the centre of the layout.

Configuration decisions

A hose-fed application should identify the inlet, outlet, vertical lift and liquid properties. Tubing-based pumping is one possible approach for compatible media; the fluid remains within the tube rather than contacting the pump mechanism. The selected pump, hose, fittings and control method still need to be reviewed together. Spraying, if required, is a separate outlet and application decision.

Planning the first build

A first trial can review the delivered liquid, operator sequence, hose handling and access for cleaning or replacement. Timed delivery, a measured quantity and continuous transfer require different verification procedures. State whether the device will be carried, fixed to a bench or connected to another module, and which power and control interfaces are available. The final SoDose configuration follows that brief.

Project-specific technical parameters

Values to define before the build.

The table identifies the reference arrangement and the values to agree for your application.

Compact liquid transfer and controlled dispensing — configuration parameters
Parameter	Configuration / value	Confirm before manufacture
Primary operation	Liquid transfer / controlled dispensing	Agree continuous or batch use
Liquid compatibility	Application-specific	Supply media and temperature information
Delivery target	Defined in mL, g or flow units	Agree measurement and tolerance
Hose and connections	Selected per configuration	Define bore, length and fittings
Outlet arrangement	Hose-fed or dedicated dispensing head	Confirm destination and access
Controls	Project-specific start, stop and settings	Review operator sequence
Power and mounting	Defined in the project scope	Confirm bench, portable or module use

These products are customizable. Configuration values and images are indicative and may change with the application. Final dimensions, components, controls and performance requirements are confirmed in the agreed project specification.

DoseCore family

One family. Different process needs.

DoseCoreA modular device family for liquid dosing, filling and application-specific mixing.

DuDoseA compact DoseCore liquid filling device with an open container bay and an application-specific configuration.

GaDoseAn upright DoseCore configuration for laboratory gas–liquid work and custom process development.

SoDoseThe compact horizontal DoseCore device for liquid transfer and controlled dispensing.

Design views & development

Render gallery

2 views

Representative QDM sodose dispensing device design visualization — SoDose dispensing device — additional design perspective · Representative design visualization

Representative CAD and generated design visualizations. These are not photographs of delivered equipment. Illustrated arrangements may change with customization; final values and visuals are confirmed in the project specification.

For supplied QDM equipment

Warranty & ongoing support.

Machine warranty

One year from commissioning.

QDM supplies equipment with a standard one-year machine warranty, starting from commissioning.

Component warranty

Manufacturer’s terms.

Purchased components are covered under the relevant manufacturer’s warranty terms. Two-year component coverage applies where provided by the manufacturer; coverage and start dates follow those terms.

Extended cover & maintenance

Plan the support you need.

Extended warranty and maintenance agreements can be arranged for the project. Coverage, duration, service responsibilities and commercial terms are agreed in the contract.

The quotation and contract define the equipment covered, the applicable warranty terms and the agreed service arrangements.

For a useful first discussion