APPLICATION & ENGINEERING GUIDE

Lotion Filling Machines

Lotion flow behaviour can vary with formulation and temperature. Product supply, controlled dosing, nozzle shutoff and pump-bottle closing are considered as one process.

Custom filling equipment design and manufacturing in Turkey. Configuration and supply scope are agreed for each application.

Flow & quantity control

Include density, viscosity, foaming and air entrainment in the review. Converting a target mass into volume requires the product density at the relevant temperature.

Pump & nozzle selection

Suitable pump, piston or alternative measurement arrangements are assessed with the product. Trials check nozzle residue, dripping and the end of the fill. No single method is assumed suitable for every lotion.

Containers & changeover

Narrow-neck bottles, open containers and pump assemblies require different access. Plan guide, support and nozzle-height changes. The pump dip tube and tightening method are included in closure design.

Batches & cleaning

For fragrance or colour changes, define how the product path is cleaned, drained and prepared again. Cleaning procedure and material compatibility are confirmed with the actual formulation.

QDM / FAQ

Liquid filling machine questions

Can lotion be filled by weight?

A suitable weighing arrangement can be assessed. Net quantity, container tare, cycle and measurement resolution are defined together.

Can pump closures be fitted automatically?

Closure geometry, dip tube and feeding behaviour are reviewed to develop a suitable placing and tightening arrangement.

Is accuracy the same at every fill quantity?

No. Dose, product properties and measurement method affect the result. Acceptance conditions are verified at defined operating points.

Give your project a starting point.

Describe your requirement in six short steps. Turn your selections into an enquiry summary and add anything specific to your process.

Configure your system →