15 KG / DESIGN TARGET
QDM PT15
15 kg payload target. Reviewed together with the mass and axis position of the camera, sensor or measurement equipment.
Explore model →QDM / PAN-TILT
Controlled positioning on two axes.
Application-specific pan-tilt systems for cameras, sensors and measurement equipment. Review PT15, PT30 and PT100 designs against your payload, mounting arrangement and operating scenario.
One family. Different payload and mounting requirements.
30 KG / DESIGN TARGET
QDM PT30
30 kg payload target. Reviewed together with the mass and axis position of the camera, sensor or measurement equipment.
Explore model →
100 KG / DESIGN TARGET
QDM PT100
Development to order for a 100 kg payload target. Carrier, bearings and drives are engineered for the payload geometry.
Explore model →Compare the product family.
| Comparison | QDM PT15 | QDM PT30 | QDM PT100 |
|---|---|---|---|
| Payload design target | 15 kg | 30 kg | 100 kg |
| Tilt travel target | −40° / +40° | −40° / +40° | −40° / +40° |
| Mechanical design approach | Drum layout with top mounting | Drum layout with top mounting | Dual-column supported carrier |
| Development & manufacture | Application-specific configuration | Application-specific configuration | Project development and manufacture to order |
Motion speeds, positioning accuracy, resolution, control system, communications, environmental protection and operating temperature are defined for each project and application. Solutions can be developed for fixed and moving platforms. Stabilisation on a moving platform is a separate requirement and validation scope.
Payloads and travel angles shown are design targets, not tested product ratings. Final configuration and performance are verified against centre of gravity, moments, motion duty and agreed tests.
Your equipment defines the application.
Camera & sensor positioning
Define the field of view alongside cable and payload clearances.
Measurement & test rigs
Share measurement-head positions, scanning sequence and dwell requirements.
Fixed or moving platform
Develop the support and drive arrangement for the mounting interface and operating conditions.
QDM / FAQ
Before selection.
How do I choose PT15, PT30 or PT100?
Payload mass is the first input. Centre of gravity, distance from the axis, dimensions, acceleration and operating environment are reviewed together. A model number alone does not confirm suitability.
What is the tilt travel?
The tilt travel target for this family is −40° / +40°. The final usable range is checked against the installed equipment, cable routing and mechanical clearances.
Can you develop for fixed and moving platforms?
Both can be considered. Moving-base conditions, shock/vibration and stabilisation requirements are defined separately. Stabilisation is assessed and validated for the application.
Can continuous pan rotation be considered?
If required, it is engineered together with power and data transfer, rotary interfaces and cable management. Pan travel and any continuous rotation feature are defined for the application.
Is PT100 an off-the-shelf product?
PT100 is presented as a solution engineered to order for a 100 kg payload design target. Manufacturing scope, validation and delivery terms follow technical review.
Let’s define the payload and operating scenario.
Share the equipment dimensions, centre of gravity, mounting arrangement and motion requirements.